My Book World Edition Ii Firmware
Loading...
My Volume®
Globe Edition™
User Manual
Systems Storage Network drive-Dual and Single
Important Safety Instructions
one. Follow all warnings and instructions marked on the product.
2. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
iii. Do not use this product near whatever liquids.
4. Do non identify this product on an unstable surface. The product may fall, causing serious damage to the product.
5. Practise not driblet the product.
vi. Practise non block the slots and openings on the dorsum or lesser side of the chassis; to ensure proper ventilation and reliable operation of the production and to protect information technology from overheating, these openings must not be blocked or covered.
7. Operate this product simply from the type of power indicated on the mark characterization. If you are not sure of the type of power available, consult your dealer or local power visitor.
viii. Do not allow anything to residuum on the power string. Do non locate this product where persons will walk on the cord.
9. If an extension cord is used with this production, make sure that the full ampere rating of the equipment plugged into the extension cord does not exceed the extension string ampere rating. Also, brand sure that the full rating of all products plugged into the wall outlet does not exceed the fuse rating.
x. Never push objects of any kind into this product through the chassis slots as they may touch dangerous voltage points or short out parts that could outcome in a fire or electric stupor.
11. Unplug this production from the wall outlet and refer servicing to qualified service personnel under the post-obit conditions:
a When the power cord or plug is damaged or frayed.
b If liquid has been spilled on the production.
c If the product has been exposed to pelting or h2o.
d If the product does not operate ordinarily when the operating instructions are followed. Adjust merely those controls that are covered by the operating instructions since improper aligning may result in damage and require all-encompassing work by a qualified technician to restore the product to normal condition.
east If the product has been dropped or the chassis has been damaged.
f If the product exhibits a distinct modify in performance, indicating a need for service.
12. In accordance with workstation regulation standards, practise non place this device in the visual field of the user due to the glossy front of the case.
Table of Contents
WD Service and Back up . . . . . . . . . . . . . . . . . . . . . . .i
Registering Your WD Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Bulldoze Format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Organisation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . half-dozen
Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Recording Your WD Product Information . . . . . . . . . . . . . . . . . . . . . . . 7
System View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . eight
Reset Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Power Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Kensington Security Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
LED Indicators (Lights) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2 My Book World Edition Basic Setup . . . . . . . . . . . .11
Step 1: Connect My Book World Edition to the Network . . . . . . . . . 11 Pace two: Admission My Book World Edition on the Network . . . . . . . . . 12
3 Backing Up Computers on the Network . . . . . . . . .23
WD Anywhere Backup Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Of import Installation Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Configuring WD Anywhere Backup . . . . . . . . . . . . . . . . . . . . . . . . . . 26
TABLE OF CONTENTS – i
iv Using Time Machine™ . . . . . . . . . . . . . . . . . . . . . . . .45
Setting upwardly Fourth dimension Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Starting a Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Restoring Backed-up Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Deleting the Entire Backup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Irresolute Your Password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
five MioNet® Remote Access. . . . . . . . . . . . . . . . . . . . . .54
MioNet Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Remote Access Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Using MioNet Spider web (after registration) . . . . . . . . . . . . . . . . . . . . . . . . 57
half-dozen How to Play/Stream Video, Music & Photos . . . . .64
Media Server Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Media Types Supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Media Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Media Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
vii Using iTunes with My Book World Edition . . . . . . .73
iTunes Media Server Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Media Types Supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Storing Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Streaming Audio in iTunes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
8 Using WD Discovery (Windows simply) . . . . . . . . . . .75
Mapping a Network Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Browse Network Shares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Desktop Shortcut Creation (Windows simply). . . . . . . . . . . . . . . . . . . . 79 Automatically Updating WD Discovery . . . . . . . . . . . . . . . . . . . . . . . . 80
TABLE OF CONTENTS – ii
nine Network Storage Manager: Basics. . . . . . . . . . . . . .81
Configuring My Volume Globe Edition . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Accessing My Book World Edition's Network Storage Director . . . 86 My Book World Edition's Network Storage Manager Features . . . . 87 User Interface Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Basic Way . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
x Network Storage Manager: Avant-garde Mode . . . .101
System Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Network Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Storage Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Media Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Users Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Status Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
eleven Download Manager: Downloader. . . . . . . . . . . . . .151
Accessing Downloader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Downloader Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
HTTP/FTP Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
CTorrent Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
12 Connecting and Managing a USB Hard Bulldoze . . .163
Connecting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Copy Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Accessing Copy Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
My Book World Edition-to-USB Re-create . . . . . . . . . . . . . . . . . . . . . . . 165
USB-to-My Book Globe Edition Copy . . . . . . . . . . . . . . . . . . . . . . . 166
Copy Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Table OF CONTENTS – iii
xiii Replacing a Drive (My Book Earth Edition 2) . . .169
14 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . .173
xv Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180
Appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185
Regulatory Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Environmental Compliance (China) . . . . . . . . . . . . . . . . . . . . . . . . . . 186
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
GNU General Public License ("GPL"). . . . . . . . . . . . . . . . . . . . . . . . 187
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188
TABLE OF CONTENTS – iv
MY BOOK WORLD EDITION
USER MANUAL
WD Service and Support
Should you encounter any problem, please give united states an opportunity to address information technology earlier returning this product. Nigh technical support questions tin can be answered through our knowledge base or eastward-mail back up service at back up.wdc.com. If the reply is not available or, if you prefer, please contact WD at the best phone number shown below.
Your production includes 30 days of complimentary telephone back up during the warranty period. This thirty-day menstruation starts on the date of your first telephone contact with WD technical support. Email support is free for the entire warranty menses and our extensive knowledge base is available 24/7. To help us keep you informed of new features and services, remember to register your product online at https://www.wdc.com/register.
Accessing Online Support
Visit our product back up website at back up.wdc.com and choose from these topics:
• Downloads - Download drivers, software, and updates for your WD product.
• Registration - Annals your WD product to get the latest updates and special offers.
• Warranty & RMA Services - Get Warranty, Product Replacement (RMA), RMA Status, and Data Recovery Data.
• Knowledge Base - Search by keyword, phrase, or reply ID.
• Installation - Get online installation aid for your WD product or software.
Contacting WD Technical Support
When contacting WD for support, accept your WD product serial number, system hardware, and organization software versions available.
| North America | Asia Pacific | ||||
| English | 800.Enquire.4WDC | Commonwealth of australia | 1 800 42 9861 | ||
| (800.275.4932) | Red china | 800 820 6682/+65 62430496 | |||
| Spanish | 800.832.4778 | Hong Kong +800 | 6008 | 6008 | |
| India | 1 800 xi 9393 (MNTL)/1 800 200 5789 (Reliance) | ||||
| 011 26384700 (Pilot Line) | |||||
| Europe (cost complimentary)* | 00800 ASK4 | Indonesia | +803 | 852 9439 | |
| WDEU | |||||
| (00800 | Japan | 00 531 650442 | |||
| 27549338) | |||||
| Korea | 02 703 6550 | ||||
| Europe | +31 880062100 | Malaysia | +800 | 6008 | 6008/i 800 88 1908/+65 62430496 |
| Middle E | +31 880062100 | Philippines | 1 800 1441 0159 | ||
| Africa | +31 880062100 | Singapore | +800 | 6008 | 6008/+800 608 6008/+65 |
| 62430496 | |||||
| Taiwan | +800 | 6008 | 6008/+65 62430496 | ||
* Toll complimentary number available in the following countries: Austria, Belgium, Denmark, France, Germany, Ireland, Italian republic, Netherlands, Norway, Spain, Sweden, Switzerland, United Kingdom.
WD SERVICE AND Back up - i
MY Book Earth EDITION
USER Manual
Registering Your WD Product
Your WD product includes 30 days of free technical support during the applicative warranty catamenia for your product. The 30-day menstruum commences on the date of your first phone contact with WD technical back up. Register online at register.wdc.com.
WD SERVICE AND SUPPORT - ii
MY Book Earth EDITION
USER MANUAL
i Overview
Introduction
Congratulations on your purchase of My Book® World Edition™, a high-speed network-attached storage system with a space-saving footprint. This organization is equipped with one or two WD drives using WD GreenPower™ engineering for efficient cooling and ability saving. The high-speed interface delivers high performance for minor offices or home users and is ideal for backing up and sharing files over the Internet.
This user manual provides step-by-step installation instructions and other important data regarding your WD product. Translated versions and updates to this user manual, tin be downloaded from http://products.wdc.com/updates. For more information and news most this product visit our website at www.westerndigital.com .
Drive Format
• My Book World Edition is a single-drive configuration.
• My Book Earth Edition Two is a dual-drive organisation that is pre-configured to RAID ane (Mirrored) mode for actress data protection. If one drive fails in RAID i, the system withal runs, and your data is preserved so you can replace the failed drive and restore the organisation. My Volume World Edition 2 likewise supports RAID 0 (Striped) fashion for maximum capacity and accelerated operation. For more data, including instructions on irresolute the RAID configuration for My Volume World Edition Ii, see "Volumes and RAID Management" on page 124.
OVERVIEW - 3
MY BOOK WORLD EDITION
USER MANUAL
Specifications
| Ethernet | High performance (x/100/1000) Gigabit Ethernet connectedness | |
| Internal hard bulldoze | WD three.five-inch SATA hard drive | |
| External USB storage | NTFS, FAT, HFS+J | |
| file systems supported | ||
| Supported protocols | HTTP, HTTPS, HFS+J, CIFS/SMB, NFS, FTP | |
| I/O ports | • USB ii.0 port (for USB device expansion) | |
| • Ethernet (RJ-45) port | ||
| Supported clients | • | Windows XP® |
| • | Windows Vista™ | |
| • | Windows® 7 | |
| • | Windows Server® 2003 | |
| (latest service packs required) | ||
| • Mac Bone® X® Tiger® | ||
| • Mac Bone® Ten Leopard® | ||
| • Mac OS®X Snow Leopard™ | ||
| Physical dimensions | My Book World Edition | |
| • Length: vi.v in (165 mm) | ||
| • Width: 5.4 in (137 mm) | ||
| • Peak: 2.i in (54 mm) | ||
| • Weight: 2.6 lb (i.18 kg) | ||
| My Book World Edition II | ||
| • Length: six.5 in (165 mm) | ||
| • Width: 6.0 in (152 mm) | ||
| • Pinnacle: 3.eight in (97 mm) | ||
| • Weight: 5.5 lb (ii.5 kg) | ||
| Power specifications | • Input voltage: 100V to 240V AC | |
| • Input frequency: l to 60 Hz | ||
| • Output voltage: 12V DC, 3A | ||
| Environmental | • Operating temperature: five to 35 °C (41 to 95 °F) | |
| • Non-operating temperature: -xx to 65°C (-four to 149 °F) | ||
OVERVIEW - four
MY Book Globe EDITION
USER Transmission
Kit Contents
My Book World Edition
| AC adapter* | Ethernet cable | Installation CD with | Quick Install Guide | ||||||||||||
| application software | |||||||||||||||
| and user manual | |||||||||||||||
| 1 | 2 | 3 | 4 | 5 | 1 | two | 3 | 4 | 5 | ||||||
| or | |||||||||||||||
| 1 U.s.a., Japan, Taiwan, Brazil, | 4 China | one USA, Japan, Taiwan, Brazil, | 4 Communist china | ||||||||||||
| United mexican states, Republic of colombia | 5 Australia, New Zealand, | Mexico, Colombia | 5 Australia, New Zealand, | ||||||||||||
| 2 Europe, Korea, Brazil, Republic of chile | Argentina | 2 Europe, Korea, Brazil, Chile | Argentina | ||||||||||||
| 3 United Kingdom | 3 United kingdom of great britain and northern ireland | ||||||||||||||
*Global Air conditioning adapter configurations
Accessories
Visit shopwd.com (U.S. simply) to view boosted accessories like cables, ability supplies, additional difficult drives, and drive mounting track for this product. Outside the U.S., visit back up.wdc.com .
OVERVIEW - 5
MY BOOK WORLD EDITION
USER MANUAL
Organisation Requirements
Annotation: For optimum performance, the following system and network requirements are recommended. Compatibility may vary depending on the user'southward hardware configuration and operating organisation.
Important: For highest performance and reliability, it is recommended that you install the latest updates and service pack (SP). For Mac OS X, go to the Apple tree menu and select Software Update. For Windows, go to the
Start menu and select Windows Update.
Client Estimator
• Ethernet connection (network adapter)
• Operating arrangement
• Windows 2003 Active Directory Service/Windows XP/Windows Vista/Windows 7
• Mac OS X Tiger, Leopard, or Snow Leopard
• Web browser (Internet Explorer six.0 SP1 and later on on Windows platforms supported by this product; Safari 2.0 and subsequently on Mac platforms supported by this product; Firefox 2.0 and afterwards on supported Windows and Mac platforms)
• Adobe Flash ActiveX 9 or higher (required for WD Discovery ™)
Local Network
• Router/switch (Gigabit required to maximize performance)
Wide Area Network
• Broadband Net connection required for remote access using MioNet
Pre-Installation
Before unpacking and installing the system, select a suitable site for the system for maximum efficiency. Identify the device in a site that is:
• Near a grounded power outlet
• Clean and dust free
• On a stable surface free from vibration
• Well-ventilated and away from sources of heat
• Secluded from electromagnetic fields from electrical devices such as air conditioners, radio, Idiot box transmitters.
OVERVIEW - six
MY Volume World EDITION
USER Manual
Recording Your WD Production Information
In the following tabular array, write the serial number and model number of your new WD product found on the label on the bottom of the device. Also, write the purchase appointment and other notes such as your operating system and version. This information is necessary for setup and technical support.
Serial Number:
Model Number:
Purchase Engagement:
Organization and Software Notes:
OVERVIEW - vii
MY BOOK Earth EDITION
USER Transmission
System View
Power button
LED
USB port
(for expansion only)
Ethernet port
Reset push button
Kensington®
Security Slot
Ports
Component Icon Clarification
| USB port | Connects to a USB hard drive for boosted storage. |
Note: This port makes it possible to copy files from a USB hard bulldoze to the device and vice-versa using the Re-create Manager feature. Meet "Connecting and Managing a USB Hard Drive" on page 163 for detailed instructions.
| Ethernet port | Connects the device to a local network. | ||||||
| Reset button | Press to restore the admin user proper noun and password for the device. | ||||||
| Power port | Connects the device to an Air conditioning adapter and the power outlet. | ||||||
Reset Button
The reset button restores configuration settings such as the network mode/IP address and admin name and password to default manufactory settings without erasing shared folders and volumes. For more data on how to reset the system, come across "Resetting the My Volume World Edition" on page 173.
OVERVIEW - 8
MY Volume WORLD EDITION
USER MANUAL
Power Button
Important: The device powers on automatically upon initial connection to ability, which may take up to three minutes. During this fourth dimension, do non printing the power push. After the initial setup, you lot demand to use the power push to plow the unit on and off.
The power button turns the device on or off. To plow on the device, press the ability button and hold information technology down until the bottom LED illuminates, and and then release. Property the push downwards for four seconds powers off the device.
When ability is applied to the unit of measurement by plugging in the external power supply connected to the DC plug connector, the unit automatically powers upwards. This ensures the unit will automatically restart later a power failure.
If you power down a My Volume World Edition by pressing the power push button, and disconnect and then reconnect the power plug, the unit powers upwardly for virtually 30 seconds and and so powers itself downward. This ensures that the unit will not turn on accidently and remain on if at that place is a power failure. You need to printing the power push button to plough the unit on.
Kensington Security Slot
For drive security, the device is equipped with a security slot, which supports a standard Kensington security cable. For more information on the Kensington security slot and available products, visit www.kensington.com.
OVERVIEW - 9
MY BOOK WORLD EDITION
USER Transmission
LED Indicators (Lights)
The Ability/Activity and Capacity Gauge indicators are represented past a single bar of six LEDs (lights) on the front console of the drive.
Power/Activity LED Behavior
Power On Sequence
| Appearance | Bulldoze State |
| Bottom LED dimmed | Powering up |
| LEDs light upwards in sequence from bottom to tiptop | Transitioning to drive ready |
Normal Operation | |
| Appearance | Drive State |
| Capacity Gauge, steady illumination (see beneath) | Power-on country, ready for utilise |
| Moving up and down | Bulldoze in use |
| Tiresome flashing (every 4 seconds) | Organisation standby |
Capacity Gauge
When the device is turned on, the Capacity Gauge indicates space used on the drive by fully illuminating vi sections in an upward vertical direction. Each section represents approximately 17 percent of drive capacity. Because this drive is preformatted, the first section is illuminated upon installation.
Power Down Sequence
| Appearance | Bulldoze Country |
| Dimming up/dimming downward in an odd/fifty-fifty alternating | Drive powering downwardly |
| pattern | |
Device Events | |
| Appearance | Bulldoze Country |
| Bottom LED dimmed, top LED flashing | Boot unsuccessful |
| Fast flashing (every half second) | My Volume system event, action required |
| (run into "Organization Events" on page 177) | |
| Continuous "center out" sweep blueprint | Unit of measurement failure |
OVERVIEW - ten
MY Book WORLD EDITION
USER MANUAL
2 My Book World Edition Basic Setup
Step i: Connect My Volume World Edition to the Network
Follow the steps below to connect the My Book World Edition to a small abode/office network.
four
2
i
iii
1. Connect one cease of the Ethernet cable into the Ethernet port located on the back of the device.
2. Connect the other end of the Ethernet cable straight into a router or network switch port.
Note: For faster initial loading of your content, connect the cable directly to the network port of your computer. Run across page 176 for more data.
iii. Connect the terminate of the adapter into the DC power supply socket located on the back of the device.
4. Plug the Air conditioning adapter into a power outlet. The unit of measurement powers up automatically .
Important: Wait for the My Book World Edition to finish powering up (approximately three minutes) earlier configuring the device. During this time, do not press the power button. The lesser LED on the forepart of the My Book device fully illuminates.
To power down the device, press and hold down the power button downwardly for at to the lowest degree 4 seconds.
MY BOOK WORLD EDITION BASIC SETUP - xi
MY BOOK Globe EDITION
USER MANUAL
Step two: Access My Book Globe Edition on the Network
Y'all can easily find your My Volume World Edition on the local surface area network (LAN). Follow the advisable procedure below:
Windows:
• "Using WD Discovery with Windows XP/Windows Vista/Windows seven" on folio 12.
• "Using Windows Vista/Windows vii" on folio fifteen.
Mac Os X:
• "Using Mac Bone X Leopard/Snow Leopard" on page 19
• "Using Mac OS X Tiger" on page 20
Using WD Discovery with Windows XP/Windows Vista/Windows 7
Note: The WD Discovery application on the included CD should exist installed on every PC connected to the LAN from which you intend to access your My Book World Edition.
ane. Turn on your figurer and expect for the operating organisation to load.
2. Insert the product CD into the CD or DVD ROM drive.
Note: If AutoPlay is disabled on your computer, you must install the utilities manually. Click Start and and so (My) Figurer. Correct-click the CD/DVD drive, click Open, and double-click Setup.exe.
3. Windows Vista/Windows 7: Click Run setup.exe , and and so click Allow .
4. Click Have in the Terms of Agreement screen.
MY BOOK WORLD EDITION Basic SETUP - 12
MY BOOK WORLD EDITION
USER MANUAL
5. If y'all have continued the My Book device properly as shown in the Connect screen, click the Side by side button.
6. The Application Installer screen opens, displaying a list of options. Click
WD Discovery Tool. Once the WD Discovery Tool installation is complete, it automatically launches and the WD Discovery icon displays on your desktop.
7. Click MyBookWorld and click Map Network Drive in the Things to Do listing.
A message appears asking whether you want to map the drive automatically. viii. You lot take two options. Complete pace (a) or stride (b).
MY Volume World EDITION Basic SETUP - xiii
MY BOOK World EDITION
USER Manual
(a) To map the drive automatically, click Yes.
All share folders bachelor on the device are mapped as network drives automatically. Available drive messages are assigned backwards from Z.
When mapping completes, the share folders appear as network drives in the WD Discovery screen. Click Back to render to the main folio.
(b) To map the drive manually, click No. All share folders on the device are listed on-screen. Select a folder proper name, and so select a drive alphabetic character. Click Yes to consummate drive letter consignment.
Note: Once a unit of measurement is mapped to a network bulldoze, automatically or manually, information technology keeps the aforementioned drive letter.
9. Close the WD Discovery Tool.
10. Click Start and then (My) Computer. The network drives display. Yous can now drag and drib files into the network drive folders using (My) Computer or Windows Explorer.
MY Volume WORLD EDITION Basic SETUP - 14
MY BOOK WORLD EDITION
USER Manual
Using Windows Vista/Windows 7
Windows Vista and Windows seven offering an alternative to WD Discovery for easy setup and mapping of the unit.
1. For Windows Vista/Windows 7, click Start>Estimator>Network.
2. Right-click MyBookWorld in the Network and Sharing center and select Install from the drop-down carte du jour.
The Found New Hardware screen displays.
3. Click Locate and install driver software (recommended).
MY Book World EDITION Bones SETUP - fifteen
MY Volume World EDITION
USER MANUAL
4. Click Yes, always search online (recommended).
Windows starts searching for the driver. Depending on your organization setup, it may have a minute or and then to locate the driver.
5. When installation is complete, a confirmation message displays. Click Close.
MY Book Globe EDITION BASIC SETUP - xvi
MY BOOK WORLD EDITION
USER MANUAL
A My Book World Edition icon displays adjacent to MyBookWorld, and an Open option displays in the drop-down menu.
To open the My Book World Edition shares:
1. Correct-click MyBookWorld and select Open from the drop-down menu. The Public, Configuration, and Download shares (default shares) brandish.
2. View the contents or close the screen as desired.
To create a desktop shortcut to the My Book World Edition:
Right-click MyBookWorld and select Create Shortcut from the driblet-down menu.
To view the My Book Earth Edition spider web page:
Right-click MyBookWorld and select View device webpage from the dropdown bill of fare. The login page appears.
MY BOOK WORLD EDITION Basic SETUP - 17
MY Book WORLD EDITION
USER MANUAL
Note: (See "Accessing My Book Globe Edition's Network Storage Manager" on page 86 for information on logging in.)
To view the properties of the My Book World Edition:
1. Right-click MyBookWorld and select Properties from the drop-down menu. The MyBookWorld Properties screen displays.
2. Click OK to close the screen.
MY BOOK Globe EDITION Bones SETUP - xviii
MY BOOK WORLD EDITION
USER MANUAL
Using Mac OS X Leopard/Snow Leopard
1. Turn on your computer and wait for the operating system to load.
2. Open Finder.
3. In Finder, click MyBookWorld in the Shared listing (if necessary, click All and so double-click MyBookWorld).
Annotation: Configuration is a read-only share containing but a Assist file and the login page.
4. Double-click the Public share.
The share may appear as a shared drive icon on the desktop depending on your preferences. You can now drag and drop files into the network drive folders using Finder.
5. If yous want to make the shared drive icon permanent on the desktop, create an alias. Following are two ways to practice that:
Note: Before creating an alias, click Finder>Preferences and make sure Connected Servers is checked.
• Click the item y'all wish to allonym and concord downwardly the mouse push button. Hold down the Cmd and Option keys simultaneously and drag the detail to where y'all want the alias to appear. Instead of moving the original item, this creates an alias at the new location.
MY Volume Globe EDITION BASIC SETUP - 19
MY Volume WORLD EDITION
USER Transmission
• Double-click the item you want to allonym (e.thousand., the Public share icon), and and so click File>Make Alias.
The Public share icon displays on your desktop.
Using Mac Bone X Tiger
1. Plough on your computer and await for the operating system to load.
2. Open Finder, and double-click the Mybookworld icon.
3. Type "admin" in both the Name and Countersign fields, and and so click Connect.
4. Make certain that Public is highlighted in the Select the volumes to mountain list, and then click OK.
MY BOOK Earth EDITION BASIC SETUP - twenty
MY BOOK WORLD EDITION
USER MANUAL
5. Double-click the Public icon that is now on your desktop to display three shared subfolders. You can at present drag and drop files into the shared folders using Finder.
vi. If you want to brand the shared bulldoze icon permanent on the desktop, create an alias. Following are ii ways to create to practise that:
Note: Earlier creating an alias, click Finder>Preferences and make sure Connected Servers is checked.
• Click the item y'all wish to alias and hold down the mouse button. Concord down the Cmd and Option keys simultaneously and drag the item to where you want the alias to appear. Instead of moving the original detail, this creates an alias at the new location.
• Double-click the detail you want to alias (due east.g., the Public share icon), and so click File>Brand Alias.
The Public share icon displays on your desktop.
MY Book World EDITION Basic SETUP - 21
MY BOOK WORLD EDITION
USER MANUAL
Congratulations!
Your My Book Globe Edition is at present ready for apply and is attainable as a drive letter in My Computer (Windows) or a shared drive icon on the desktop (Mac OS X). You can now drag and driblet files into your My Book device and motion files from My Volume to any computer in your network that has been set up according to the instructions above.
This user manual contains information and instructions for all other basic and advanced My Book device direction functions, including:
• Backing up your computer (see "Backing Up Computers on the Network" on page 23)
• Accessing My Book from a remote computer (encounter "MioNet® Remote Access" on page 54)
• Playing and streaming media (run across "How to Play/Stream Video, Music & Photos" on page 64)
• Using iTunes ®service (see "Using iTunes with My Book World Edition" on page 73)
• Connecting a USB drive for additional storage and file exchange (run into "Using WD Discovery (Windows but)" on folio 75 and "Click the Submit button to apply the changes." on page 162)
• Configuring the My Book device and network settings, set eastward-mail or window alerts, change the administrator password, perform firmware upgrades, restore system to mill defaults, configure RAID (My Book World Edition II but), manage file share preferences, set the backup destination folder, fix disk quotas, set a share folder for users, add, alter, and delete users and groups, and change all user and grouping permissions (read/write, read only, no access) to shares/folders and USB storage devices (encounter "Network Storage Managing director: Basics" on page 81)
MY BOOK WORLD EDITION Bones SETUP - 22
MY Book WORLD EDITION
USER MANUAL
3 Backing Up Computers on the Network
WD Anywhere Backup Overview
WD Anywhere Fill-in software is a quick, piece of cake and secure way to back up all the computers in your network. Your My World Book Edition CD comes with 5 licenses for WD Anywhere Backup—each one enabling yous to activate a single PC or Mac for continuous backup. Select the files yous want to back upward, and then set the My Volume World Edition and forget it; every time you make a change in your files, it's automatically backed up.
Important Installation Notes
• Install on Each Computer: You must employ the Installation CD to install WD Anywhere Fill-in on each figurer in your network.
• Connect to the LAN and Power On First: You lot must have your My World Book Edition connected to your local area network and powered on earlier you lot install WD Anywhere Backup software. This ensures that the WD Anywhere Backup recognizes your My Earth Volume Edition and installs as the full software version instead of the 30 Mean solar day trial version.
• Laptop Users: When you are travelling, your laptop files are non being backed upwardly. Your files be backed up automatically upon reconnection with your home network.
Windows
i. Turn on your calculator and wait for the operating system to load.
two. Insert the software CD into the CD-ROM drive.
Note: If AutoPlay is disabled on your estimator, you must install the utilities manually. Click Get-go and so Reckoner (Windows Vista/Windows vii) or My Figurer (Windows XP). Right-click the CD/DVD bulldoze, click Open, and double-click Setup.exe.
3. Windows Vista/Windows 7: Click Run setup.exe and then click Allow.
four. Click Accept in the Terms of Agreement screen.
5. If you take connected the device properly as shown in the Connect screen, click the Side by side button.
6. Click WD Anywhere Backup.
Note: Information technology may take a infinitesimal or two for the next screen to brandish.
BACKING UP COMPUTERS ON THE NETWORK - 23
MY Volume WORLD EDITION
USER MANUAL
7. Select your preferred language from the list and click OK.
eight. Shut all other open applications, so click the Next button to keep.
9. If y'all accept the terms of the understanding, click I Agree to proceed.
10. After WD Anywhere Fill-in has finished installing, click End to brainstorm using WD Anywhere Backup.
BACKING UP COMPUTERS ON THE NETWORK - 24
MY BOOK WORLD EDITION
USER MANUAL
The WD Anywhere Backup Configuration screen displays. Continue with "Configuring WD Anywhere Fill-in" on page 26.
Notation: The WD Anywhere Backup icon now displays on your desktop, and WD Anywhere Backup is listed in Program Files.
Mac OS 10
1. Plough on your computer and wait for the operating system to load.
two. Insert the software CD into the CD-ROM bulldoze.
3. Double-click the My Volume World Edition CD icon that mounts to the desktop.
4. Open the WD_Mac_Tools folder and double-click WDAnywhereBackup.dmg.
five. Go on with "Configuring WD Anywhere Backup" on page 26.
Backing UP COMPUTERS ON THE NETWORK - 25
MY BOOK Globe EDITION
USER MANUAL
Configuring WD Anywhere Backup
Later starting WD Anywhere Backup as described in the previous affiliate, you can back up your data using several methods.
1-Click Fill-in
WD Anywhere Backup allows y'all to back up all your of import data, such equally documents, photos, music and videos, on your computer's hard bulldoze with the click of a button. This feature backs up your data to the My Volume World Edition so yous tin restore your information in the consequence that your computer's hard drive crashes.
The beginning time you install WD Anywhere Fill-in, the WD Anywhere Fill-in Configuration screen appears.
Note: The screen beneath only appears when you have My Volume Earth Edition attached to your reckoner'due south local area network.
This screen offers 2 options:
Automatic Backup (Brainstorm Backup Button)
The main choice is to have the My Book Globe Edition automatically and continuously back upward your files, providing balls that your files can ever be restored.
• What information technology backs upwardly: One-click backup backs up documents, photos, and media files on the chief drive of your calculator.
• What information technology does not back up: Ane-click backup does non include files on the A: drive, application files such as MS Word or Adobe Acrobat, temporary and log files, virtual hard disk files, or files in the system folders.
Bankroll UP COMPUTERS ON THE NETWORK - 26
MY BOOK WORLD EDITION
USER MANUAL
Customized Fill-in: The other option is to customize your backup to dorsum upwardly merely selected types of files, for example, only photos or videos, or other drives.
To start an automatic and complete backup of your computer's hard drive:
1. Click the Brainstorm Fill-in push.
2. A message explains that initial backup will use moderate resources on your calculator. To intermission the backup, click Intermission until Organization Idle. To go on the backup running in the groundwork, click Continue.
Note: If you practise not want these messages to display in the future, click Do non show Configuration Wizard at startup.
3. A registration screen appears. If desired, enter the optional registration information. Click Continue.
BACKING Upwardly COMPUTERS ON THE NETWORK - 27
MY Book World EDITION
USER Transmission
The WD Anywhere Fill-in screen displays the progress of the fill-in and the percent of CPU used.
When the backup has finished, a backup complete message displays.
Bankroll UP COMPUTERS ON THE NETWORK - 28
MY BOOK Earth EDITION
USER Manual
To customize a backup program:
1. Click the Customize My Backup link at the bottom correct of the WD Anywhere Fill-in Configuration screen. The Welcome to the WD Anywhere Backup Wizard screen appears.
2. Go along with stride 3 in How to Create a Backup Plan.
How to Create a Backup Plan
Creating and customizing a fill-in plan allows y'all to automatically safeguard confronting data loss.
1. If WD Anywhere Backup is not already running, click the WD Anywhere Fill-in icon on the desktop.
2. Click Create. (If the screen shows no backup plans, none have been created.)
Backing UP COMPUTERS ON THE NETWORK - 29
MY Book World EDITION
USER Transmission
3. The welcome screen displays. Click the Side by side button.
iv. Click Network Places to locate your My Book Globe Edition on your local surface area network. Click the Next button.
BACKING Up COMPUTERS ON THE NETWORK - 30
MY BOOK WORLD EDITION
USER Manual
5. Click All Items from SmartPicks.
Yous have 2 options:
• To select specific items: See "Selecting your ain fill-in items" on page 34.
• To select all items: proceed with the procedure below.
Selecting all items from SmartPicks
1. Click the All Items from SmartPicks button. The File Tally screen may appear:
2. If you lot do not want to encounter this bulletin once more, select the check box at the bottom. Click OK.
BACKING UP COMPUTERS ON THE NETWORK - 31
MY BOOK Globe EDITION
USER MANUAL
3. The SmartPicks screen displays, listing mutual file types that y'all tin back up.
Select each file blazon you desire to back up. You lot can besides click Select None to clear all selections, or click Select All to select all of the items.
iv. To add more items, click the Add Backup Items button. The Local Folders tab displays. Select additional folders and click Select.
Bankroll UP COMPUTERS ON THE NETWORK - 32
MY Volume World EDITION
USER MANUAL
5. To exclude more items from your programme:
(a) Click the Prove Advanced Items push.
(b) Click the Add together Exclusion button.
(c) Select items to exclude from the backup plan, or click the Select Folder to Exclude and select whatever folders from the programme. Click the Select button.
6. On the Items Selected for Backup screen, click the Side by side push button.
7. Continue with "Completing the Backup Plan" on page 35.
Backing UP COMPUTERS ON THE NETWORK - 33
MY BOOK Globe EDITION
USER Manual
Selecting your ain backup items
1. Click the My Own Backup Items button. The SmartPicks screen appears, listing default file locations you lot can back up.
two. Y'all take ii options:
(a) On the SmartPicks tab, select each particular you want to support. You lot can likewise click Select None to clear all selections, or click Select All to select all of the items. When finished, click
the Next button.
(b) On the Local Folders tab, select each folder yous want to dorsum up and click Select.
BACKING UP COMPUTERS ON THE NETWORK - 34
MY Book Earth EDITION
USER MANUAL
3. On the Items Selected for Fill-in screen, you tin can add more items or use advanced items equally described in "Selecting all items from SmartPicks" on page 31.
4. On the Items Selected for Backup screen, click the Next button.
Annotation: The Tally screen may announced. Encounter "Selecting all items from SmartPicks" on folio 31 for information about this screen.
5. Go along with "Completing the Backup Plan" on page 35.
Completing the Fill-in Plan
1. Proper noun your backup programme and click the Next push button. Y'all can create additional backup plans past repeating the steps higher up.
Backing Upwards COMPUTERS ON THE NETWORK - 35
MY BOOK WORLD EDITION
USER MANUAL
2. A confirmation screen appears. Click Done.
3. A message explains that initial backup will use moderate resources on your computer. To intermission the backup, click Pause until System Idle.
four. To keep the fill-in running in the background, click Continue.
The WD Anywhere Backup screen displays the progress of the backup and the percentage of CPU used.
Bankroll UP COMPUTERS ON THE NETWORK - 36
MY Volume WORLD EDITION
USER Manual
When the backup finishes, the Backup Complete screen appears.
Alternatively, shut the screen, click the WD Anywhere Backup icon, and select
Testify backup status.
As files are backed upwardly, a small notification window appears.
BACKING Up COMPUTERS ON THE NETWORK - 37
MY BOOK WORLD EDITION
USER Manual
Restoring a Backup Plan
Y'all can restore the files in your backup plan to a specified location in the event that y'all accidentally delete a file, desire to compare file versions, or have lost all data due to a hard drive crash on your reckoner.
1. Click View and Restore.
two. Click a backup plan in the Select a Plan list, or to search for a backup programme, enter the name in the Search by File Name field and click Search.
iii. Click the box(es) side by side to the folders or files yous want to restore.
4. From the Restore Files to list, select a location for your restored files and click the Restore button.
BACKING UP COMPUTERS ON THE NETWORK - 38
MY BOOK Earth EDITION
USER MANUAL
Reactivating a Backup Plan
Yous may reactivate an old backup programme if you desire to continue bankroll up the files specified in that programme.
ane. On the bill of fare bar, click Actions>Reactivate Fill-in Plan.
2. The Reactivate wizard appears. Click the Next push button.
Bankroll Up COMPUTERS ON THE NETWORK - 39
MY Book WORLD EDITION
USER Manual
3. Scan to select the location of the backup binder and click the Next button.
four. If y'all have more than i backup plan, select the ane you want to reactivate and click OK.
BACKING Up COMPUTERS ON THE NETWORK - 40
MY BOOK Globe EDITION
USER MANUAL
The post-obit screen appears:
5. Select the No, just reactivate the backup program and start backing up choice and click the Next button. Your backup plan is reactivated, and your estimator backs upwardly files onto your selected fill-in destination.
Important: If you select the Yes option, all the files in your backup up plan are restored onto your computer. This overwrites the files on your calculator with the files from your fill-in plan. See "Restoring a Fill-in Plan" on page 38.
Bankroll UP COMPUTERS ON THE NETWORK - 41
MY BOOK Globe EDITION
USER Transmission
Editing a Backup Plan
Icons
Click the icons to add or remove files to and from backup plans, keep multiple revisions of files on mitt for recall, remove entire plans, and view the backup log.
Selecting a Fill-in Programme
If yous have more than than one fill-in plan, select the one you desire by clicking in its box. A bluish border surrounds the selected programme.
Changing Selected Files
1. On the WD Anywhere Backup screen, click the Change Selected Files icon. (Run across "Icons" on page 42.) The WD Anywhere Backup Configuration screen appears.
Note: To deselect all listed files, click the Select None link. To select all the listed files, click the
Select All link.
BACKING UP COMPUTERS ON THE NETWORK - 42
MY Book WORLD EDITION
USER MANUAL
2. Do one of the following:
• To add together files, click the Add Backup Items button.
• To remove files, select the files and click the Remove Selected Items push.
• To exclude files from the backup, click the Show Advanced Options button.
Depending on your selections, subsequent screens may brandish.
3. When you finish selecting items to add or remove, click the Select (or OK, depending on the screen) button.
4. When returned to the WD Anywhere Backup Configuration screen, click the Done push button.
Changing Backup Programme Settings
Yous can change the number of versions of the same files WD Anywhere Backup should keep. For example, yous may desire to keep yesterday's version as well as today'southward version.
i. Click the Change Selected Settings icon. (Meet "Icons" on page 42.) Select the Continue upwardly to check box and enter the maximum number of before versions of your files to keep.
2. Click OK.
Removing a Fill-in Plan
You can delete a backup plan on the WD Anywhere Backup screen. Your backed up files remain at their destination until you lot delete them manually.
1. Click the Remove Fill-in Programme icon. (See "Icons" on page 42.)
ii. In response to the confirmation message, click OK.
Showing the Backup and Error Logs
WD Anywhere keeps a log of all actions and backup errors.
BACKING Upwardly COMPUTERS ON THE NETWORK - 43
MY BOOK Earth EDITION
USER Transmission
ane. Select the backup plan, and click the Show Backup Log icon. (See "Icons" on page 42.) The Backup Log appears.
ii. To view the error log, click the Fault Log tab.
3. To cause an caption of an fault in the listing displayed in the lower part of the screen, click the fault.
iv. To clear selected errors, select their check box and click the Clear Selected Errors button.
v. To clear all errors, click the Clear All Errors button.
6. To prevent the Fault Log from displaying transient errors, click the Practise not notify me about transient errors check box. This selection affects all fill-in plans.
seven. To see which files have been backed upward, click the click here to launch the WD Anywhere Restore application link. (For data on restoring, see "Restoring a Fill-in Plan" on page 38.)
BACKING UP COMPUTERS ON THE NETWORK - 44
My Book World Edition Ii Firmware,
Source: https://manualmachine.com/westerndigital/mybookworldedition/1799424-user-manual/
Posted by: emersonandhom.blogspot.com
0 Response to "My Book World Edition Ii Firmware"
Post a Comment